Wire Cutter 15 Degree Hard – TC Tips Orthodontic Archwire Cutter

The Wire Cutter 15 Degree Hard from Peak Surgicals is a reusable orthodontic cutting instrument manufactured from medical-grade stainless steel with Tungsten Carbide (TC) tips, featuring a 15-degree angled jaw orientation and rated to cut hard archwires up to 0.022″ x 0.028″ (0.56mm x 0.71mm), designed for precise intraoral archwire trimming during fixed orthodontic treatment. Certified to CE, ISO 13485, and FDA standards, this instrument is used by orthodontists and dental clinicians in orthodontic practices, dental hospitals, and specialist orthodontic departments.

Tungsten Carbide Tips for Cutting Hard Archwires up to 0.022″ x 0.028″

The Wire Cutter 15 Degree Hard is fitted with Tungsten Carbide (TC) cutting tips, which provide significantly greater hardness and edge retention than standard stainless steel jaws. This TC tip construction allows the instrument to cut through hard stainless steel archwires — including rectangular wires up to 0.022″ x 0.028″ (0.56mm x 0.71mm) — with a clean shear and without deforming the wire end or fatiguing the cutting edge over repeated use. TC-tipped cutters are the standard specification for instruments intended to cut harder orthodontic wire gauges, where stainless steel jaws alone would wear prematurely.

15-Degree Jaw Angulation for Posterior Intraoral Access

The 15-degree jaw angulation of this Wire Cutter is designed to improve access to archwire segments in the posterior arch, where the straight-line approach of a non-angled cutter is restricted by the angle of the dental arch and the proximity of adjacent tissues. The angled tip allows the clinician to position the cutting jaws directly over the wire distal to the terminal bracket without requiring excessive patient mouth opening or awkward instrument orientation. This geometry reduces the risk of soft tissue trauma during wire trimming and improves cutting precision in the posterior quadrants.

Hard Wire Cutting Applications in Fixed Orthodontic Treatment

The Wire Cutter 15 Degree Hard is used to trim archwire ends during archwire placement, to cut wire ligatures during archwire changes, and to section archwires during debonding. It is specifically suited to the harder wire gauges used in the intermediate and finishing stages of fixed orthodontic treatment, including stainless steel rectangular wires where lighter TC-tipped soft wire cutters would be insufficient. The instrument is a standard component of archwire change trays and debonding kits in orthodontic practices, dental schools, and hospital orthodontic departments.

Medical-Grade Stainless Steel Body with TC Tips for Extended Clinical Service Life

The instrument body is manufactured from medical-grade stainless steel, providing corrosion resistance and structural rigidity under repeated cutting loads. The Tungsten Carbide cutting tips are precision-ground and maintain their edge geometry across extended clinical use, making TC-tipped wire cutters more cost-effective over the instrument lifecycle than stainless steel alternatives that require more frequent replacement. The instrument is rust-free and compatible with standard decontamination and sterilization cycles used in orthodontic facilities.

CE Mark, ISO 13485, and FDA Certification for Orthodontic Instrument Procurement

The Wire Cutter 15 Degree Hard is classified as a Class I medical device manufactured under CE Mark, ISO 13485, and FDA compliant quality standards. ISO 13485 certification confirms Peak Surgicals operates a documented quality management system covering design control, material traceability, and production consistency for dental and orthodontic instruments. CE Mark confirms conformity with European medical device regulations, and FDA compliance supports procurement for US-based orthodontic practices, dental schools, and hospital orthodontic departments requiring verified regulatory documentation.

Product Specifications